This is a highly concentrated, industrial strength, rinsing additive. It has been formulated to be used through a dosing unit, typically associated with this type of product. When used in conjunction with SUPERDISH-H, we guarantee streak free results.

Advantages

· Safe for use on all machines

· Low foaming

· Spot free rinsing

· Biodegradable

· Highly concentrated

· Very economical

· Easy dosing

· SABS 1828 MARK BEARING

Physical Properties

Foaming ability : low foaming
S.G : 1.02
PH : 8.0-9.0
Colour : no colour
Odour : Slight alcohol
Heat Stability : Recommended for use between 20°C and 90°C.

Method of Application

For automatic dishwashers:
Pre-set the dosing unit to dilute at a rate of 1:5,000. In the unlikely event that optimal results are not achieved at this rate, the dilution rate may be lowered. To achieve maximum results, ensure that RINSE AID-H is used in conjunction with SUPERDISH-H.

ALWAYS ENSURE THAT ALL PRODUCTS ARE RINSED FROM ALL FOOD CONTACT SURFACES

Toxicology and First Aid

Keep out of reach of children.  Wear gloves, protective clothing and face/eye protection.  Avoid eye contact - if it occurs - wash immediately and seek medical attention if necessary. Avoid inhalation -  artificial respiration and oxygen may be required in severe cases.  Avoid skin contact, wash off with copious amounts of water and remove contaminated clothes.  Ingestion – DO NOT INDUCE VOMITING, give milk or large quantities of water.

The recommendations herein are based on laboratory tests and in field use experiments.  To the best of our knowledge these are accurate and since conditions of actual use are beyond our control, all recommendations are made without any warranty whatsoever.

This is a highly concentrated, heavy duty, cleaning chemical, used as the detergent in all industrial automatic dishwashing machines. It has been formulated to be used through a typical dosing unit associated with this type of product. Due to its excellent low foaming and fat busting abilities, this universal product can also be manually used in any areas where such product properties are required. It is suitable for all food related industries such as restaurants, canteens, meat factories, bottle washing facilities, etc, and for hard stainless steel surface cleaning.

Advantages

· Highly alkaline

· Low foaming

· Improved cleaning and rinsing properties, especially useful for fatty and oily surfaces.

· Biodegradable when diluted

· Highly concentrated caustic based solution

· SABS 1828 MARK BEARING

Physical Properties

Foaming ability : low foaming
S.G : 1.3
PH : 13+
Colour : no colour  / slightly brown
Odour : Typical
Heat Stability : Recommended for use between 20°C and 90°C.

Method of Application

For automatic dishwashers:
Pre-set the dosing unit to dilute at a rate of 1:5,000. At this dilution all normal soilage will be removed. In the unlikely event that optimal results are not achieved at this rate, the dilution rate may be lowered. To achieve maximum results, ensure that SUPERDISH-H is used in conjunction with RINSE AID-H.

For general degreasing and manual cleaning:
For general degreasing of hard surfaces we recommend a dilution >1:100 with water. 
As a hot soak 2% SUPERDISH-H at 85°C 30 minutes
As a cold soak 4% SUPERDISH-H for 7 to 14 days at 20°C.

ALWAYS ENSURE THAT ALL PRODUCTS ARE RINSED FROM ALL FOOD CONTACT SURFACES

Toxicology and First Aid

Caution: This product should not be used on items such as galvanized surfaces and aluminium alloys. Do not mix with acids or acid based products as this will result in the release of gas.
Keep out of reach of children.  Wear gloves, protective clothing and face/eye protection.  Avoid eye contact - if it occurs - wash immediately and seek medical attention if necessary. Avoid inhalation - severe irritant - artificial respiration and oxygen may be required in severe cases.  Avoid skin contact, wash off with copious amounts of water and remove contaminated clothes.  Ingestion – DO NOT INDUCE VOMITING, give milk or large quantities of water.

The recommendations herein are based on laboratory tests and in field use experiments.  To the best of our knowledge these are accurate and since conditions of actual use are beyond our control, all recommendations are made without any warranty whatsoever.

Acid Dox H is a broad-spectrum peracetic acid, anti-microbial product. Designed for use as a high-grade sanitizer for the food processing industry. It is also ideal for use in the dairy, mineral water and beverage industries.

Advantages

· Excellent germ killing rate

· Environmentally friendly

· Excellent CIP abilities

· pH tolerant (from acid to neutral pH)

· Low Foaming

· Provides an acidified rinse and sanitizer in one

Method of Application

This product is recommended for CIP, filter bowl flooding; start up sanitizing and central sanitizing. The suggested dilution for general cleaning is 1:100 and can be used for the sanitizing of internal aluminum parts of filters, and is also effective against yeast, yoghurt, cheese and buttermilk bacteria.

It is effective against bacteria of particular concern to the dairy industry such as Salmonella sp., Staphylococcus sp and Listeria monocytogenes.

Physical Properties

pH: 1.5-3.0

S.G.: 1.1

Colour: Colourless

Flash Point: None

Rinsing Properties: Free Rinsing

Odour: Like vinegar

Toxicology and First Aid

This product will react with all types of contaminants – particularly organic materials and alkali’s resulting in heat and oxygen release.

This product can cause corrosive burns as well as being injurious to health when swallowed. In the event of skin or eye contact, wash immediately with copious amounts of water and seek medical advice.

The recommendations herein are based on laboratory tests and in field use experiments. To the best of our knowledge these are accurate and since conditions of actual use are beyond our control, all recommendations are made without any warranty whatsoever.

Introduction

This product is a low foaming acid cleaner and descaler for all types of milking machines It Is also an excellent general cleaner for the food industry. Being a high grade, heavy-duty product it can be ideally used in milking machines and CIP systems.

Advantages

· Biodegradable

· Low Foaming

· Free rinsing

· Non fragranced

Physical Properties

Appearance: Clear Liquid

PH: 0.5 (1%)

S.G: 1.19

Solubility: 100%

Method of Application

a) Milking Equipment: Clean all equipment with the chlor alkali powder. Making sure that the equipment is thoroughly rinsed and drained prior to using Acid Clean- H. Use between 50 and 80ml per 10 litres of water at a temperature of 40°C, depending on water hardness. Circulate for 15 minutes and drain well and rinse.

b) Use 80ml per 10 litres to wash cleaning equipment and rinse well.

Toxicology and First Aid

Safety apparel is recommended when mixing the product, namely gloves and face shield. Should eye contact occur, rinse immediately with water and seek medical advice. Skin contact may cause burning and washing with water immediately is strongly recommended. Should the product be ingested – do not induce vomiting. Drink milk and seek medical attention.

The recommendations herein are based on laboratory tests and in field use experiments. To the best of our knowledge these are accurate and since conditions of actual use are beyond our control, all recommendations are made without any warranty whatsoever.

Introduction

This is standard bleach containing 5% available chlorine at the time of manufacture. It has a four-point action plan. It bleaches, disinfects deodorizes and sanitizes. It is ideal for the cleaning and sanitizing of equipment where a longer contact time is required and also as an excellent stain and mould remover. This product may be used in all food type factories where the use of chlorine is suitable.

Advantages

· High Concentration

· Disinfects and bleaches

· Biodegradable

· Free Rinsing

· Broad spectrum sanitation

Method of Application

a) For general disinfecting: Clean surface thoroughly with a general detergent and then use Bleach-5H at a dilution rate of 1:100. The product will contain 400ppm of available chlorine at this dilution. If the surface to be cleaned is non-porous, dilute at a ratio of 1:200.

b) This product can be used at lower concentrations for water purification, drain cleaning etc.

Physical Properties

Chlorine Content: 5% when packed

S.G.: 1.1

Colour: Light straw

Flash Point: None

Odour: Typical

Heat Stability: Stable at room temperature

Toxicology and First Aid

Caution: This product should not be used on items such as galvanized surfaces and aluminium alloys. Do not mix with acids or acid based products as this will result in the release of chlorine gas.

In the event of skin or eye contact with undiluted product, wash immediately with copious amounts of water, remove contaminated clothing and seek medical advice. When ingested, drink water or milk, do not induce vomiting.

The recommendations herein are based on laboratory tests and in field use experiments. To the best of our knowledge these are accurate and since conditions of actual use are beyond our control, all recommendations are made without any warranty whatsoever.

This is a highly concentrated, high foaming, sterilizing and cleaning chemical, used for all types of cleaning in the food industry. It is suitable for all food related industries such as, meat factories, dairies, sweet factories, etc. for hard surface cleaning using the foam method.

Advantages

· Very high stable foam

· Disinfects (chlorine)

· Good cleaning

· Stain removing properties

· Biodegradable

· Highly concentrated

Physical Properties

Foam: Very stable fine foam

S.G: 1.2

PH: 13+

Colour: Clear

Odour: Typical

Heat Stability: Not recommended for use above 60°C. Ideal operating temperature below

45°C

Method of Application

When using as a foam applicator, it is recommended to dilute between 1:20 (1000 ppm chlorine) and 1:40 (500 ppm chlorine). Foam the surfaces to be cleaned and leave for at least 10 minutes before washing away. It can also be used through a high pressure cleaner at a low temperature (ideal 45°C) and a dilution of between 1:75 and 1:100. This product is highly recommended for general food factory cleaning.

Toxicology and First Aid

Caution: This product should not be used on items such as galvanized surfaces and aluminium alloys. Do not mix with acids or acid based products as this will result in the release of chlorine gas.

Keep out of reach of children. Avoid eye contact – if it occurs – wash immediately and seek medical attention if necessary. Do not inhale – artificial respiration may be required in severe cases. Avoid skin contact, wash off with copious amounts of water. Induce vomiting only when large amounts were ingested – otherwise drink water or milk.

The recommendations herein are based on laboratory tests and in field use experiments. To the best of our knowledge these are accurate and since conditions of actual use are beyond our control, all recommendations are made without any warranty whatsoever.

Introduction

This is a thick, clear colourless liquid for use in soap dispensers. It also contains

anti-bacterial agents and alcohol, and is therefore ideally used in hospitals, veterinary clinics, kitchens etc.

Advantages

· Ideal for use in dispensers

· Effective in hard / soft water

· Disinfects

· Biodegradable

· Leaves hands feeling soft

· Economical

· Non-irritating to the skin

Method of Application

This product is to be used as is, preferably through a dispensing unit. Use approximately 5ml per application. Rinse after use or the product can remain safely on your hands.

Physical Properties

Colour: Clear

Appearance: Clear Liquid

PH: 5.5-7.0

Odour: None

Density: 1.03

Flash Point: None

Rinsing Properties: Free Rinsing

Heat Stability: Stable for 24 hours

Toxicology and First Aid

This is an environmentally friendly product and can therefore be handled completely without fear of contamination, poisoning or skin irritation. If swallowed, drink an excess of water and milk to induce vomiting.

The recommendations herein are based on laboratory tests and in field use experiments. To the best of our knowledge these are accurate and since conditions of actual use are beyond our control, all recommendations are made without any warranty whatsoever.

Introduction

In line with modern European trends, we have developed a product, which is totally environmentally friendly as well as being an excellent all-purpose cleaner. Multi-H is a neutral general purpose solvent detergent that is designed to comply above SABS 1344 requirements. It has excellent cleaning ability with the added benefit of being both environmentally and user friendly.

Advantages

· Excellent dirt removal properties

· Environmentally friendly

· Biodegradable

· Free Rinsing

· Effective on oil and grease

· Long shelf life

· PH neutral

Physical Properties

PH: 6.0-9.0

S.G: 1.03

Colour: Clear

Flash Point: None

Rinsing Properties: Free Rinsing

Heat Stability: Stable for 24 hours at 60°C

Methods of Application

A) LIGHT DUTY: Dilute 1:200 for windows etc

B) MEDIUM DUTY: Dilute 1: 40-100 for walls, table tops and food preparation

areas.

C) HEAVY DUTY: Dilute 1:10 for removal of heavy oils and grease.

Toxicology and First Aid

This is an environmentally friendly product and can therefore be handled without any fear of contamination, poisoning or skin irritation. If swallowed drink an excess of water and milk and induce vomiting. Stomach pump may be required for large quantities.

The recommendations herein are based on laboratory tests and in field use experiments. To the best of our knowledge these are accurate and since conditions of actual use are beyond our control, all recommendations are made without any warranty whatsoever.

Introduction

Neutra- H is a scientific blend of both non-ionic and ionic surfactants to give maximum cleaning ability. It has a high foaming value and is free rinsing. It is formulated to comply with all aspects of SABS 825.

Advantages

· Highly concentrated

· Excellent rinsing

· Gentle on skin

· Can be used at many varying dilutions

· pH neutral

Physical Properties

Colour: Clear light amber

Viscosity: Viscous

S.G: 1.05

Flash Point: None

Bio-degrable: Totally

PH: Neutral 6.5-9.0

Methods of Application

Neutra -H is an absolute general purpose cleaner. Anything that can be cleaned with water may be cleaned with Neutra- H. For general cleaning, use the minimum amount. Too much foam can hinder the cleaning process. This product may be used for cleaning walls, floors, carpets, overalls etc.

a) For light duty cleaning dilute 1:200

b) For medium duty: 1:100

c) For heavy duty: 1:50

Toxicology and First Aid

This is an environmentally friendly product and can therefore be handled completely without fear of contamination, poisoning or skin irritation. If swallowed drink an excess of milk and water and do not induce vomiting. Eye or skin contact – rinse with copious amounts of water.

The recommendations herein are based on laboratory tests and in field use experiments. To the best of our knowledge these are accurate and since conditions of actual use are beyond our control, all recommendations are made without any warranty whatsoever.

Introduction

This is a white, free flowing powder containing stabilized chlorine as a sterilizer for the cleaning of all hard surfaces, where cleaning and sanitizing are required. Ideally used in all food and dairy related industries.

Advantages

· Economical

· Kills bacteria, yeast and mould

· Leaves surfaces clean and corrosion free

· Fully biodegradable

· Can be used at any temperature up to 60°C

· Non-corrosive to stainless steel / aluminum

Method of Application

Use 30 gram per 10 litres of water. This will give 250 ppm of available chlorine. Mop or wipe the surface to be cleaned, and then rinse off with clean water.

Physical Properties

Appearance : Powder

Colour : White

Odour : Pungent Chlorine

PH : +/- 12-13

S.G. : +/- 1.1

Water Solubility : Miscible in all proportions

Toxicology and First Aid

Concentrated solutions may cause burning of skin or eyes. Ingestion can cause violent purging and / or diarrhea. Should eye or skin contact occur, wash with copious amounts of water. Avoid the inhalation of chlorine fumes – ventilate area or remove patient to fresh air.

The above recommendations herein are based on laboratory tests and in field use experiments to the best of our knowledge these are accurate and since conditions of actual use are beyond our control, all recommendations are made without any warranty whatsoever.

Introduction

This is a universal 2 in 1 high-grade disinfectant detergent, complying with SABS 639 /1853 requirements. This product is designed for general cleaning and disinfecting, but can also be used through foaming machines due to its high foaming qualities.

This especially formulated product has been designed along European guidelines. It replaces the new European banned nonyl phenols, which act as the products detergent and foaming agents.

Advantages:

· Effective in all water conditions

· High foaming qualities

· Biodegradable

· Excellent detergency

· Totally free rinsing

· Non-perfumed

· Broad spectrum germ killing abilities

Methods of Application:

a) General disinfecting: at a dilution 1 : 100 this product can be used for all general cleaning and disinfecting without tainting food products. It is however recommended that this product be used as a final cleaner after most heavy soils have been removed.

b) Foam cleaning/disinfecting: At a dilution of 1 : 20 it can be used as an excellent foam cleaner through foaming lances and will also act as a very strong disinfectant and cleaner.

Physical Properties

PH : 6.5 – 9.0

S. G. : 1.01

Fragrance : None

Colour : Light yellow

Flash point : None

Rinsing properties : Free rinsing

Heat Stability : Stable

Toxicology and First Aid

This is an environmentally friendly product and can therefore be handled complete without fear of contamination, poisoning or skin irritation. If swallowed, drink an excess of water and milk. The recommendations herein are based on laboratory tests and in field use experiments. To the best of our knowledge these are accurate and since conditions of actual use are beyond our control, all recommendations are made without any warranty whatsoever.

This is a highly concentrated, heavy duty, cleaning chemical, used for cleaning of burnt-on oils, protein and fatty deposits, smoke residues and CIP in the food industry. It is suitable for all food related industries such as meat factories, dairies, sweet factories, mineral water, beer, soft drink manufacturers, bottle washers etc, for hard stainless steel surface cleaning.

Advantages

· Highly alkaline

· Low foaming

· Improved cleaning and rinsing properties, especially useful for fatty and oily surfaces.

· Stain removing properties

· Biodegradable when diluted

· Highly concentrated – more than 30% caustic

Physical Properties

Foam: low foam

S.G: 1.3

pH: 13+

Colour: slightly brown

Odour: Typical

Heat Stability: Recommended for use between 20°C and 90°C.

Method of Application

CIP: use 0,3% to 0,5% Alkali H at 65°C

Pasteurisers: use 0,8% to 1,0% Alkali H at 75°C

UHT processing: use 1,5% to 2% Alkali H at 85°C

Bottle washing: use 1% to 2% Alkali H as required at high temperature.

Hot soak: 1% Alkali H at 85°C 30 minutes

Cold soak: 2% Alkali H for 7 to 14 days at 20°C.

Toxicology and First Aid

Caution: This product should not be used on items such as galvanized surfaces and aluminium alloys. Do not mix with acids or acid based products as this will result in the release of gas.

Keep out of reach of children. Wear gloves, protective clothing and face/eye protection. Avoid eye contact - if it occurs - wash immediately and seek medical attention if necessary. Avoid inhalation - severe irritant - artificial respiration and oxygen may be required in severe cases. Avoid skin contact, wash off with copious amounts of water and remove contaminated clothes. Ingestion – DO NOT INDUCE VOMITING, give milk or large quantities of water.

The recommendations herein are based on laboratory tests and in field use experiments. To the best of our knowledge these are accurate and since conditions of actual use are beyond our control, all recommendations are made without any warranty whatsoever.

This is a concentrated, ready to use alcohol-containing surface disinfectant, used for the disinfection of cleaned surfaces where rinsing is problematic. It is suitable for all food related industries such as meat and fish factories, dairies, sweet factories, mineral water, soft drink manufacturers, bottle washers etc, for surface disinfection.

Advantages

· Volatile-alcohol based.

· No rinsing of surface required.

· Can be applied to all food contact surfaces.

· Alcohol smell - does not contain perfume.

· Biodegradable when diluted.

· Ready to use, no dilution required.

Physical Properties

Foam: none.

S.G: 0,79

Colour: Colourless and clear.

Odour: Typical, alcohol.

Hazards: Flammable.

Heat Stability: Recommended for use at room temperature.

Method of Application

Apply with a spray device. Do not dilute. Leave to evaporate (dry).

Toxicology and First Aid

Caution: alcohol is flammable, take care !!!

Keep out of reach of children. Wear gloves, protective clothing and face/eye protection. Avoid eye contact - if it occurs - wash immediately with water and seek medical attention if necessary. Avoid inhalation - irritant - artificial respiration and oxygen may be required in severe cases. Avoid skin contact, can be absorbed through skin - wash off with copious amounts of water and remove contaminated clothes. Ingestion – do not induce vomiting, give milk or water.

The recommendations herein are based on laboratory tests and in field use experiments. To the best of our knowledge these are accurate and since conditions of actual use are beyond our control, all recommendations are made without any warranty whatsoever.

Introduction

This is a thick, yellow liquid for use in soap dispensers. It contains a dual chain QAC as the anti-bacterial agent, thickener and surfactant and is ideally used in hospitals, veterinary clinics, kitchens and food factories.

Advantages

· Ideal for use in dispensers

· Effective in hard / soft water

· Disinfects

· Biodegradable

· Leaves hands feeling soft

· Economical

Method of Application

This product should be used as is, preferably through a dispensing unit. Use approximately 5ml per application. Rub hands well, and rinse thoroughly with clean water.

Physical Properties

Colour: Yellow

Appearance: Yellow Liquid

pH: Slightly alkaline

Odour: None – non perfumed

Density: 1.03

Flash Point: None

Rinsing Properties: Free Rinsing

Heat Stability: Stable for 24 hours

Toxicology and First Aid

This is an environmentally friendly product and can therefore be handled completely without fear of contamination or poisoning. Skin irritation may result from sensitive individuals – needs to rinse well after washing of the hands. If swallowed, drink an excess of water or milk.

The recommendations herein are based on laboratory tests and in field use experiments. To the best of our knowledge these are accurate and since conditions of actual use are beyond our control, all recommendations are made without any warranty whatsoever.

Introduction

This pearl-coloured hand cleanser is an economical, high foaming, high-grade hand cleanser. It contains toilet grade detergent, an emollient and a soluble cleaner. It acts against the common everyday soils, fats, grease oil, ink, etc. without resorting to harsh alkalis or abrasives. It has neutral pH content and hence the skin remains healthy and moist even after repeated applications. This product is especially designed for use in dispensers and is recommended for use in toilets, hotels, kitchens, restaurants, butcheries and other industries.

Advantages:

Contains no perfume – food environment acceptable

Biodegradable

Economical

Non-toxic

Non-irritating to the skin

Non-abrasive

No drying out action on the skin

Absolutely free-rinsing, leaving hands feeling smooth and fresh

Flows freely from dispensers

Method of Application:

Use undiluted. Approximately 5 to 10 millilitres per application.

Physical Properties:

Appearance : Thick liquid

Colour : Pearl

Odour : Odourless

pH : 5.5 - 7.5

S. G. : 1.05

Viscosity : Thick liquid

Toxicology and First Aid:

This is an environmentally friendly product and can therefore be handled completely without fear of contamination, poisoning or skin irritation. If swallowed, drink excess amounts of water and/or milk to dilute the cleanser.

The recommendations herein are based on laboratory tests and in field experiments. To the best of our knowledge these are accurate and since conditions of actual use are beyond our control, all recommendations are made without any warranty whatsoever.

Introduction

This is a high-grade disinfectant, complying with SABS 1853 requirements. This product is designed for normal and high level disinfection and sterilization, and can be used through foaming machines due to its inherent foaming qualities.

This especially formulated product has been designed along European guidelines. It contains the latest generation of double chain QAC’s and TBTO providing excellent microbicidal efficacy.

Advantages:

· Effective in all water conditions

· Intermediate foaming qualities

· Biodegradable

· Totally free rinsing

· Non-perfumed – food surface approved

· Kills bacteria, bacterial spores, fungi and yeasts.

Methods of Application:

a) General disinfecting: at a dilution 1: 2000 this product can be used for all general disinfecting without tainting food products. It is however recommended that this product be used as a final disinfectant after heavy soils have been removed.

b) High level disinfection: At a dilution of 1:100 it kills 99,9% of fungal spores in 15 minutes, and 99,9% bacterial spores in 1 hour at 22°C.

Physical Properties

PH : 6.5 – 9.0

S. G. : 1.01

Fragrance : None

Colour : Light yellow

Flash point : None

Rinsing properties : Free rinsing

Heat Stability : Stable

Toxicology and First Aid

This is an environmentally friendly product and can therefore be handled complete without fear of contamination, poisoning or skin irritation. If swallowed, drink an excess of water and milk. The recommendations herein are based on laboratory tests and in field use experiments. To the best of our knowledge these are accurate and since conditions of actual use are beyond our control, all recommendations are made without any warranty whatsoever.